July 23, 2024
Product Color: As The Picture Shows. Package Include: 1 Pc New. Fuel Pump Module Assembly. 2.0 R AWD. 1994 ccm, 110 KW, 150 PS. 1994 ccm, 121 KW, 165 PS. Legacy IV Station Wagon. 2457 ccm, 127 KW, 173 PS. (Compatible table only for reference). Please make sure the part number matches the part. Please check the photos carefully, make sure the photos showed is the same as you wanted. Installation guide NOT included, professional skills required during the installation, we highly recommend asking repair shop for help. Due to different displays and light variations, all pictures shown may not reflect the actual color or condition of the item. We are not responsible for any wrong or undeliverable addresses. If you can’t find your country in our store, please contact me for details. Please contact me within 24 hours after you receive the goods. PLEASE NOTE We can not accept a return of any item with any indication that it has been used.
Replaces the Following Part Numbers. It is the responsibility of the purchaser to verify complete fitment. Fuel Pump Module Assembly. Fuel Pump and Strainer Set. Fuel Pump Mounting Gasket. Fits the Following Vehicles. 6.7L 6651CC 406Cu. V8 DIESEL OHV Turbocharged. Herko Engine Crankshaft Position Sensor YLC3A6C315AB for Ford Super Duty 20-22. Bosch Windshield Wiper Blade 22B Front-Right. Bosch Fuel Pump Module F00HK01510 For Ford F-250 Super Duty F-350 Super Duty. Herko Diesel Exhaust Fluid (DEF) Pump DEFP006 for Ford F-250 Super Duty 17-21. SAVE UP TO 30% FROM RETAIL PRICES. DO NOT MISS OUT ON THIS GREAT OPPORTUNITY!! Direct Fit Application, Check Fitment Chart. Year, Make, Model, Trim. Some applications are still dependent on other information. In the Compatibility Chart be sure to put your mouse over the. IMPORTANT PART DETAILS BOX. SOME SMART PHONES WILL NOT HAVE ACCESS TO THE COMPATIBILITY CHART. Review Photo below for guidance.
July 21, 2024
Weclcome to A-premium Auto Parts Store. Brake Pad Wear Sensor. Power Hatch Lift Support. Fuel Pump Module Assembly Right for Volkswagen Touareg 2004 2005 2006 3.2L 4.2L. Direct Replacement, Easy Installation. 100% Strict QC & Fitment Tested. 100% Customer Service Satisfaction. After Service Follow Up. 7L6 919 087 G, 69951, P76328M, E8569M, FG1404, SP5023M. Left and Right Side. Direct Replacement To The original One. 100% Testing Before Packing. 100% Leakaging And Fuel Level Sensor Testing. 100% Fuel Level Sensor and Visual Inspection. According to the SAE J 1537 Standard: CMM, Pull & Push testing, Salt Spray Testing, Comprehensive Testing. Hardness Testing, Fuel pump life testing, Fuel level sensor life testing. Thermal Cycling Testing, Vibration-Temperature-Humidity comprehensive testing. Raw material-Central feeding system. Fuel Pump Clean Room. The New Design of Module Assembly. Keep the fuel pump work reliable for a long time in the tank under the low fuel level. Unlimited Mileage Quality Guarantee. Labor expenses, towing expenses, additional repair expenses or other related expenses. Only sells high quality products, all items in. Our store will come with one year unlimited. All items are brand new and packed by box. The additional packing material will help you reduce the damage risk a lot during the transportation. Representatives will try the best to make you happy. Customers service center will operate from. Warehouse will operate from. You can message us any questions via. Ask a question at the bottom of the website, our. Representatives will reply you in hours. / Add to Favourites.
![Herko Fuel Pump Module 341GE for Land Rover LR2 2008-2012 Herko Fuel Pump Module 341GE for Land Rover LR2 2008-2012](https://rocketfuelpumpmodule.com/wp-content/img/zyvyja.gif)
3.2L 3192CC l6 GAS DOHC Naturally Aspirated. 3.2L 3192CC 195Cu. L6 GAS DOHC Naturally Aspirated. Toyota Oxygen Sensor F00E262768 for Volvo Land Rover S60 V70 S40 LR3 V50 03-16. Herko Fuel Tank Sending Unit Seal OR-2 for Chevrolet Pontiac Uplander Montana. Oxygen Sensor Herko Automotive OX032 For Volvo Land Rover 03-15. Fuel Pump Module Assembly. Compatibility table is to be used as a guide only. Part Reference Numbers are provided so you may check with you mechanic to verify this is the correct part for your vehicle. Por favor incluya su informacióndel orden y la informacióndel vehÃculo cuando se comunique con nosotros. Our parts only fit the original, stock components that come with the vehicle from the factory. Fitment with aftermarket components will vary. Actual product may vary from the picture(s) provided. We do not mark merchandise values below value or mark items as gifts- US and International government regulations prohibit such behavior. Due to the complexity of installing fuel pumps, Alanis Deals requires all its fuel pump repair kits to be installed by a certified technician. Customer is required to show proof of installation by a certified mechanic. Alanis Deals does not warrant that the Product will be free from non-substantial design defects or errors. Any Product which has been altered in any way, improperly installed, or not used for its’ intended purpose. Any costs associated with the repair or replacement of the Product including labor, installation or other costs incurred by the Purchaser, and in particular, any costs relating to the removal or replacement of any Product that is affixed to another device. Any damage to the Product due to external causes, including accident, problems with electrical power, abnormal electrical, mechanical or environmental conditions, usage not in accordance with product instructions, misuse, neglect, alteration, repair, improper installation, or improper testing.
Fuel Pump Module Assembly. Direct Fit Application, Check Fitment Chart. Compatibility:Please choose your vehicle year, make and model for specific results. 1584 ccm, 34 KW, 46 PS. 1 Aftermarket product with premium quality. 2 According to the original factory specifications. 3 Perfect match for the original car. 5 Stable performance, high reliability. Good quality, good operation. Comes in a sealed package, ready to install. Installation instructions not included, Tool not included. Our goal is to provide quality products with attractive price. Besides, we hava a special feature that we accept mini order production. FUEL PUMP REPLACEMENT INSTRUCITONS. Relieving the pressure can be done by removing the fuel cap. Locate and remove the fuel pump fuse from the fuse block. After the fuse is removed, start the engine and left the engine consume the remaining gasoline in the fuel lines. The engine will stop when stop when remaining fuel is consumed. Once the engine has stopped, crank the engine for three seconds to relieve any possible remaining fuel pressure. Disconnect the vehicles negative/ground cable at the battery and secure it so that it will not accidentally make a connection while replacing the fuel pump. Drain the gasoline from the vehicle’s fuel tank. Using only and OSHA approved gasoline transfer pump and approved fuel storage containers, remove as much gasoline as from the fuel tank through the filler neck. Raise the vehicle with an automotive hoist or jack up the vehicle and support it with OSHA approved jack stands, which allow unobstructed clearance for the removal of the fuel tank. Fuel tank gasoline levels will vary depending on the amount of gasoline removed through the filler neck. Once the vehicle is raised, additional gasoline can be removed through bracket connections. Fuel tanks vary from vehicle to vehicle; the following fuel tank removal instructions are for a typical fuel tank removal. For more specific instructions on fuel tank removal for your specific vehicle it may be necessary to obtain an approved service manual for the vehicle that you are replacing the fuel pump on. Disconnect all visible fuel hoses that connect to the fuel tank from the rest of the vehicle (be sure to mark or label all connections for reassembly). Disconnect electrical connections at the fuel tank taking extra care not to damage pins or connectors. If necessary, disconnect and remove the fuel filler neck from the vehicle. Loosen the retaining straps of the fuel tank and support the fuel tank prior to removing the straps entirely. Take extra precautions to avoid a fuel spill. Take note of the condition and location of any insulating pads. Worn or misaligned, wrongly installed pads should be replaced as they may affect the performance of the new fuel pump. Before removing the bracket from the fuel tank, be sure to thoroughly clean any dirt or debris that may have accumulated at the top of the fuel tank or at the opening of the locking ring area. This step must be done to prevent debris or foreign matter from entering the fuel tank which can cause problems later on. Using the correct tppls, remove the locking ring or retainer using care not to damage it. Carefully lift out the bracket from the fuel tank. The old O-ring seal must be removed using extra care not to let pieces fall into the tank as it may be brittle. Discard the old O-ring seal, it will be replaced with a new O-ring seal which is included in the kit. Replacement of the pump. Replace the pump and filter as directed in the instructions that accompany the kit. Ensure that all connections are secure before installation into the fuel tank. Before bracket reinstallation, carefully inspect the inside of the fuel tank for contamination, dirt or foreign matter. Clean out the fuel tank if necessary prior to bracket reinstallation. Ensure the bracket is fully assembled and ready for installation. Install the new O-ring in the groove at the brscket opening. Reinstall the locking ring or retainer using the correct tools. Reinstalling the fuel tank. Prior to lifting the fuel tank into place, ensure that all fuel lines and hoses sound. Replace any inferior or defective fuel lines or hoses. Support the fuel tank in the correct installation position. Once the fuel tank is in the correct position install the support straps and bolt in the same manner that they were removed. Reconnect all fuel lines and electrical connections securely ensuring the there are no kinks or perforations. Gasoline should only be reinstalled back into the vehicles fuel tank with an OSHA approved gasoline-dispensing device. Before moving to the next step, be sure to clean up any fuel that may have spilled during pump replacement or during the gasoline refilling process. At this time a visual inspection for leaks is necessary. Correct any leaks at this time prior to proceeding to the next step. Following the reverse order or the removal, reinstall the fuel pump fuse back into the fuse block and reconnect the negative/ground battery cable to the battery. Start the vehicle’s engine and inspect for any leaks. If leaks exist correct them immediately. Some vehicles are equipped with OBD (On board diagnostic)systems which may have illuminated a light indicating a trouble code of malfunction. Clear trouble codes using a service manual specific to the vehicle. Prohibit fuel pump free working in non-oil situation. Fuel pump in line should use standard fuel:alcohol pump can use alcohol fuel, diesel fuel pump use diesel fuel, methanol fuel pump use methanol. You need replace the fuel pump and strainer / filter at the same time. It is not allowed to use falled off products. Replace fuel filter according to the stipulated time or mileage. Replacement pump should be kept in clean work environment. Oil should be added timely if it is too low, it is recommended to add oil when the tank only have 1/3 of fuel. Fuel pump should match with vehicles models.